News Center-Sawdust granulator-sawdust granulator-granulator-developed

+86-155-5000-1177

+86-135-7377-3936

 Language

Language

Customer Dynamics

Home page

The use of biomass pellet machine

The use of biomass pellet machine

China has a large amount of agricultural waste during the annual harvest season. Although the country has banned burning, it has not yet achieved good results. The biomass pellet machine can use these wastes, which is not only low in cost, but also helps to reduce environmental pollution and waste of resources caused by straw burning. If the biomass pellet machine production line is used for crop waste such as straw, straw, rice husk, etc., it is generally crushed, and the dryer and pellet machine are arranged according to production efficiency and distributed by 1:1.: 2. One grinder is equipped with one dryer and two biomass pellet machines. The material of the biomass pellet machine loses water during storage, and some high-moisture raw materials are particularly obvious. Biomass particles on

21

2019

/

03

The Significance of Manufacturing Biomass Renewable Fuel by Sawdust Pellet Machine

Sawdust pellet machine is used for professional processing of biomass pellet fuel equipment, the emergence of the equipment will not only waste valuable renewable resources processed into biomass pellet fuel, but also effectively protect our living environment. The pellet fuel processed by sawdust pellet machine has the characteristics of high density, high calorific value, sufficient fuel, low cost, easy to use, clean and sanitary, easy to transport and store, and can be used as gasifier, heating furnace, agricultural heating room, boiler and power generation fuel. my country's biomass energy utilization industry started late, that is, it has only become popular in recent years, and some users will also bear the burden in the process of investment.

21

2019

/

03

How to do sawdust pellet machine mold blockage

How to do sawdust pellet machine mold blockage

There are no more than two reasons for the clogging of the wood pellet machine, one is too fast and the output is too slow, and the other is that there are impurities in the raw materials, such as nails and bricks. Generally, both things happen. The solution is to block the die of the wood pellet machine. The solution is to first close the equipment, then open the mold cover, loosen the inner mold nut, and then pour out the extruded raw material (if it is a brick or nail). Needs to be taken out. After removal, tighten the nut. In the production process of the sawdust pellet machine, due to improper raw material moisture control and excessive raw material particle size, etc., the sawdust machine mold will be blocked, and artificial blockage is very difficult. Large wood machine manufacturing

15

2019

/

03

Factors Affecting the Output of Sawdust Pellet Machine

Factors Affecting the Output of Sawdust Pellet Machine

Factors affecting the output of the sawdust pellet machine 1. Adding a small amount of oil (0.5 ~ 1%) to the grease is beneficial to reduce the wear of the pellet machine parts, make the particles easily pass through the die hole, and increase the granulation output value. However, when the increased amount exceeds 2%, the particles are loosened. It's hard to form. Therefore, when adding high-dose oil, it is recommended to increase the total amount by 30% in the mixer and 70% in the granulator. 2. The crude fiber content of crude fiber is appropriate (3% ~ 5%), which is conducive to the combination of granular materials, reduces the pulverization rate of particles, and increases the output value of granulation. However, when the crude fiber content exceeds 10%, the viscosity is poor and bad knots will affect the particles.

15

2019

/

03

On March 2, 2019, a 55KW biomass wood pellet machine and supporting equipment were issued!

Zhangqiu developed particle machinery co., ltd, established in 1994, has more than 20 years of experience in the production and manufacture of particle machinery. its main equipment includes: particle machine, sawdust particle machine, biomass particle machine, sawdust particle machine, fuel particle machine, feed particle machine, straw particle machine, rice husk particle machine, particle machine production line, sawdust particle machine production line, complete set of particles, drying equipment, drum dryer, etc, the quality of the granular machinery and equipment produced by the company and the first-class service and after-sales service are the foundation of customer trust and the way of the company's future development.

12

2019

/

03

On February 28, 2019, 55KW wood pellet machine and supporting equipment were delivered!

Zhangqiu developed particle machinery co., ltd, established in 1994, has more than 20 years of experience in the production and manufacture of particle machinery. its main equipment includes: particle machine, sawdust particle machine, biomass particle machine, sawdust particle machine, fuel particle machine, feed particle machine, straw particle machine, rice husk particle machine, particle machine production line, sawdust particle machine production line, complete set of particles, drying equipment, drum dryer, etc, the quality of the granular machinery and equipment produced by the company and the first-class service and after-sales service are the foundation of customer trust and the way of the company's future development.

01

2019

/

03

< 1...39 40 41...44 >

Picture Name

Copyright © Zhangqiu Fada Pellet Machinery Co., Ltd.

Powered by 300.cn | SEO Tags

Business License