Industry News_Sawdust granulator-sawdust granulator-granulator-developed

+86-155-5000-1177

+86-135-7377-3936

 Language

Language

Customer Dynamics

Home page

The significance of sawdust pellet machine in biomass energy

The significance of sawdust pellet machine in biomass energy

Sawdust particle machine is a kind of mechanical equipment that uses the principle of extrusion force and friction force between the pressure wheel and the mold to make the material form. Zhangqiu City developed particle machinery over the years the company focused on wood pellet machine, sawdust pellet machine, biomass pellet machine and other mechanical equipment research and development production.

27

2019

/

08

What are the raw materials of wood pellet machine?

What are the raw materials of wood pellet machine?

The raw material of the wood pellet machine is some waste in life and production. It successfully realizes the reuse of resources, which not only saves resources, but also protects the environment. zhangqiu city developed particle machinery co., ltd., over the years focused on wood pellet machine, sawdust pellet machine, biomass pellet machine and other products production design.

22

2019

/

08

The Significance of Manufacturing Biomass Renewable Fuel by Sawdust Pellet Machine

Sawdust pellet machine is used for professional processing of biomass pellet fuel equipment, the emergence of the equipment will not only waste valuable renewable resources processed into biomass pellet fuel, but also effectively protect our living environment. The pellet fuel processed by sawdust pellet machine has the characteristics of high density, high calorific value, sufficient fuel, low cost, easy to use, clean and sanitary, easy to transport and store, and can be used as gasifier, heating furnace, agricultural heating room, boiler and power generation fuel. my country's biomass energy utilization industry started late, that is, it has only become popular in recent years, and some users will also bear the burden in the process of investment.

21

2019

/

03

How to do sawdust pellet machine mold blockage

How to do sawdust pellet machine mold blockage

There are no more than two reasons for the clogging of the wood pellet machine, one is too fast and the output is too slow, and the other is that there are impurities in the raw materials, such as nails and bricks. Generally, both things happen. The solution is to block the die of the wood pellet machine. The solution is to first close the equipment, then open the mold cover, loosen the inner mold nut, and then pour out the extruded raw material (if it is a brick or nail). Needs to be taken out. After removal, tighten the nut. In the production process of the sawdust pellet machine, due to improper raw material moisture control and excessive raw material particle size, etc., the sawdust machine mold will be blocked, and artificial blockage is very difficult. Large wood machine manufacturing

15

2019

/

03

Factors Affecting the Output of Sawdust Pellet Machine

Factors Affecting the Output of Sawdust Pellet Machine

Factors affecting the output of the sawdust pellet machine 1. Adding a small amount of oil (0.5 ~ 1%) to the grease is beneficial to reduce the wear of the pellet machine parts, make the particles easily pass through the die hole, and increase the granulation output value. However, when the increased amount exceeds 2%, the particles are loosened. It's hard to form. Therefore, when adding high-dose oil, it is recommended to increase the total amount by 30% in the mixer and 70% in the granulator. 2. The crude fiber content of crude fiber is appropriate (3% ~ 5%), which is conducive to the combination of granular materials, reduces the pulverization rate of particles, and increases the output value of granulation. However, when the crude fiber content exceeds 10%, the viscosity is poor and bad knots will affect the particles.

15

2019

/

03

The importance of the process cooling section of the granulator production line

Regarding the production of biomass particles, each time a whole production line is matched, we need to match the corresponding equipment according to the raw materials. Normally, we need the following sections for a complete granulator production line. From the crushing section of raw materials to the crushing section, the crushed materials are directly entered into the dryer, which can effectively improve the production capacity of the drying equipment. After drying, the materials can be produced within the feeding requirements of the granulator. After the granulator produces granules, it enters the cooling section, and then the cooled granules are packaged. Today, we will talk about the cold in the whole production line.

21

2019

/

02

< 1...16 17 18...20 >

Picture Name

Copyright © Zhangqiu Fada Pellet Machinery Co., Ltd.

Powered by 300.cn | SEO Tags

Business License