1
2

The importance of the process cooling section of the granulator production line


Release time:

2019-02-21

Regarding the production of biomass particles, each time a whole production line is matched, we need to match the corresponding equipment according to the raw materials. Normally, we need the following sections for a complete granulator production line. From the crushing section of raw materials to the crushing section, the crushed materials are directly entered into the dryer, which can effectively improve the production capacity of the drying equipment. After drying, the materials can be produced within the feeding requirements of the granulator. After the granulator produces granules, it enters the cooling section, and then the cooled granules are packaged. Today, we will talk about the cold in the whole production line.

Regarding the production of biomass particles, each time a whole production line is matched, we need to match the corresponding equipment according to the raw materials. Normally, a whole.Particle machine production lineWe need the following sections. From the crushing section of raw materials to the crushing section, the crushed materials are directly entered into the dryer, which can effectively improve the production capacity of the drying equipment, and the materials after drying can be produced to complete the granules within the feeding requirements of the granulator. After the granulator produces granules, it then enters the cooling section, and then the cooled granules are packaged. Today we will talk about the cooling section in the whole production line.

The cooling section mainly comes from the cooling of finished particles. The cooling equipment we mainly use includes cooling bins and counterflow coolers. For many customers, I just need to pack the particles directly after they are produced, so that one workshop section can be reduced. However, it is not known that the surface temperature of the particles is about 60-80 ℃ after they come out, and some water vapor is generated in the high pressure process. If the particles containing water vapor on the surface are directly sealed and packed, the gloss of the particles themselves will be affected, and the particle cracking and powder rate will be high, this greatly affects the selling price of the pellets. In contrast, the advantage of the cooling section is that the dust of the particles can be collected after the particles are cooled by countercurrent cooling, so that the forming rate of the particles can be improved and the selling price of the particles can be guaranteed.

As for the cooling section, it is very necessary to increase the whole production line, so as to ensure that the particles produced are more standard and the appearance is more beautiful.

would like to know more aboutsawdust pellet machine,sawdust pellet machine,Straw pellet machine,rice husk pellet machine,peanut shell pellet machine,Particle machine production linePlease continue to pay attention to the official website of Zhangqiu developed particle machinery co., ltd www.fadajixie.com