Fuel pellet machine output is affected by those factors

same paragraphFuel pellet machineThe output is big or small, why? The biomass new energy industry is developing rapidly,Fuel pellet machineIt has been known by more and more people. There are also many people who assess the situation and seize the opportunity of this industry to engage in the production of wood pellets. Of course, the manufacturer is different, the production of fuel pellet machineThe quality and standard are also different. Often many customers bring materials to the manufacturer to test the machine with high output, but if they buy the equipment back for their own production, the output will be too low. Then the problem comes, the same equipment, there is a phenomenon of different output, why?

Impact fuel pellet machineFactors of discharge

1. The grinding of the new mold of the pellet machine is very important. The new mold has a certain running-in period and needs to be ground with oil. Under normal circumstances, the moisture of sawdust should be controlled between 10-15%, adjust the gap between the pressure wheel and the mold to achieve the best state, and the fixing bolts must be screwed after adjusting the pressure wheel.

2. The size and moisture content of the material. Fuel pellet machineThe material size that can achieve uniform discharge must be less than the diameter of the particle, the particle diameter is 6-8mm, the material size should be less than it, and the moisture content of the raw material must be between 10-15%, too large or too small moisture will affect the yield of the particles.

3, choose the right fuel pellet machineMold compression ratio, different materials correspond to the compression ratio of different molds, and the compression ratio can be determined when the manufacturer tests the machine. The key problem is that you should not easily replace the materials after buying back the equipment. If the material is replaced, the compression ratio will change and the corresponding mold will be replaced. The discharge is sometimes out and sometimes not out, which may be related to the aging degree of the machine mold. It is necessary to replace the appropriate mold in time. Model output is different, the mold life is not the same. Take the 550 pellet machine as an example, its mold life is about 1000 hours.

would like to know more aboutsawdust pellet machine,sawdust pellet machine,Straw pellet machine,rice husk pellet machine,peanut shell pellet machine,Particle machine production linePlease continue to pay attention to the official website of Zhangqiu developed particle machinery co., ltd www.fadajixie.com