Four tips to call your straw pellet machine to increase production and efficiency!
Release time:
2019-02-20
The straw granulator is difficult to discharge, not smooth, and even powder, which makes people have a headache. For example, constipation is disturbing. The words are not pleasant but vivid. Today, Xiao Bian told you four wonderful ways to make your straw granulator no longer constipated: the pressure roller in the 01 straw granulator is an important part in the compression chamber, and it needs continuous rotation to make the material extrude from the die hole under the effect of rolling. However, when the pressure roller is loose, the gap between the pressure roller and the mold will become larger and the pressure will decrease, so naturally it will not be able to discharge smoothly. 02 The motor of the straw granulator needs a certain voltage to work normally. If the voltage is too high
StrawGranule machineIt is difficult to discharge materials, it is not smooth, and even powder is produced, which makes people have a headache. For example, constipation is disturbing. The words are not pleasant to hear but they are more vivid. Today, Xiao Bian told you four wonderful tricks for you.Straw pellet machineNo more constipation:
Straw pellet machineThe pressure roller in the compression chamber is an important part, it needs constant rotation to make the material by the role of rolling extrusion from the die hole. However, when the pressure roller is loose, the gap between the pressure roller and the mold will become larger and the pressure will decrease, so naturally it will not be able to discharge smoothly.
Straw pellet machineThe motor needs a certain voltage to work normally. If the voltage is too low, even if the motor can rotate, the power generated by it is not enough to quickly extrude the materials in the compression chamber. At this time, there will be a large number of materials in the compression chamber blockage, affecting production.
In straw pellet machineIn the production process, the speed of pressing out the material is too slow or the mold hole is blocked, which may make the straw granulator press out the material obstacle. In this way, a large number of materials are blocked in the compression chamber, so that the wood pellet machine can not stop.
04
When the straw pellet machineAfter the main bearing is damaged, the pressing parts will not be able to work, and a large amount of material will not be discharged in the compression chamber and will be blocked in it.
Related News
Copyright © Zhangqiu Fada Pellet Machinery Co., Ltd.