What are the signs before the failure of the sawdust particle machine? And how to solve it
1. After the sawdust particle machine produces particles, it is found that the surface of the particles is uneven and even there are many redundant wounds on the particles. This problem shows that there is a problem with the blade inside the sawdust particle machine. If the blade is in good condition, the surface of the particles produced is very smooth and almost all sizes are due to comparison. 2. The surface of sawdust particles is too smooth, which is also a problem. This can show that the mechanical hard objects are too high, the ring die compression is relatively small, and the compression holes should be increased. This phenomenon is relatively rare, and this kind of problem is rarely encountered. However, it should be avoided as early as possible during construction. The first thing to do is to check the raw materials before construction.
1、sawdust pellet machineAfter the production of particles, it was found that the surface of the particles was uneven and even there were many redundant wounds on the particles, which explained the problem.sawdust pellet machineThere is a problem with the internal blade. If the blade is intact, the surface of the particles produced is very smooth and almost all sizes are relatively uniform.
2、sawdust particlesThe surface is too smooth, which is also a problem. This can show that the mechanical hard object is too high, the ring die compression is relatively small, and the compression hole should be increased. This phenomenon is relatively rare, and this kind of problem is rarely encountered. However, it should be avoided as early as possible during construction. The first thing to do is to check the raw materials before construction to see if there are hard objects. This is very important.
3、sawdust particlesThe phenomenon of blocking the machine often occurs when the water content is too high, so we try our best to carry out the construction after testing the water content of the particles. If the water content is too high, we will take off or dry in the sun, and try our best to avoid the construction when the particles are wet. This will increase the load on the machine and affect the normal operation of the particle machine.
4、sawdust pellet machineThe machine itself cracks, this phenomenon is very obvious, the general particle machine appears this kind of fault will be heard from the sound, the particle machine in the operation of a lot of noise, or a lot of noise, this phenomenon indicates that there is a fault, so we must stop running for inspection, particle machine put into use after we often encounter the quality of the machine itself, most of the reasons are due to the customer's long-term use, so we must pay attention to this when running the particle machine.
Want to know more about sawdust pellet machine, sawdust pellet machine, straw pellet machine, rice husk pellet machine, peanut shell pellet machine, pellet machine production linePlease continue to pay attention to the official website of Zhangqiu developed particle machinery co., ltd www.fadajixie.com