What are the raw materials of wood pellet machine

For all of you,sawdust pellet machineShould be no longer a strange thing, the so-called wood pellet machine, is the wood chips, straw and other raw materials into biomass fuel pellets equipment, to achieve the reuse of resources. Its emergence conforms to the needs of environmental protection of the times, and naturally has been recognized by the broad masses of the people. Today, Xiaobian will share with you what raw materials can be processed by sawdust pellet machine.

Wood pellet machine can process raw materials:

1. The residues of crops: including cotton straw, wheat straw, rice straw, corn straw, corn cob and other grain straw. Among them, corncob can be used as the main raw material for the production of chemical products such as xylitol and furfural. Corn straw, wheat orange, cotton stalk and other straws can be treated and mixed with resin to make fiber board. Straw can also be directly returned to the field as fertilizer.

2. Sawdust: the particle size of sawdust is very excellent, the yield of particles made of sawdust is stable, the particles are smooth and the hardness is high.

3, small shavings: because the particle size is relatively large, it is not easy to enter the sawdust particle machine, need to be crushed after use.

4. Sand light powder in board factory and furniture factory: sand light powder has a lighter proportion and is easy to block. It is recommended to mix sawdust to granulate together, and the proportion can be accounted for separately.50About% can achieve the best results.

5. Wood board and wood chip scrap: wood board and wood chip scrap can only be used after being crushed.

6, fibrous material: the length of the fiber should be controlled, the general length should not exceed5mm.

In the working process of the wood pellet machine, it all depends on the physical molding of the fiber material without adding any adhesive. Straw, sawdust and other biomass raw materials are mainly composed of cellulose, hemicellulose, lignocellulose and its resin, wax and so on. Among the above components, lignocellulose is widely considered to be the best internal binder in the organism. When the temperature reaches70℃~110When the temperature is around, the lignocellulose will become soft and the adhesive force will begin to improve. At this time, a certain pressure is applied to the outside world, which can make it closely bond with cellulose, hemicellulose, etc., and directly bond with adjacent biomass particles. After cooling, the strength increases, and the rod-shaped, small piece, granular biomass solid molding fuel can be obtained.

Usesawdust pellet machineIt not only solves the storage of waste materials, but also brings new benefits. Zhangqiu developed particle machinery is a professional manufacturer of sawdust pellet machine, biomass pellet machine and sawdust pellet machine. We warmly welcome customers from all over the world to visit our factory!