How to make sawdust pellet machine mold more "longevity"

In recent years, my country's environmental protection policies have become more and more stringent. As a representative of new energy, biomass particles have gradually become popular, and biomass particles in many areas were even in short supply. With the biomass particles burning together, there is also a wood pellet machine for producing biomass particles, from the initial flat die pellet machine to the later horizontal ring die pellet machine to the now popular vertical ring die wood pellet machine, which is constantly updated. (How to makesawdust pellet machineMold more"longevity")

The mold is a vulnerable part of the sawdust pellet machine, which needs to be replaced constantly. The expensive mold is also a major cost in the production process of sawdust pellets. How to increase the service life of biomass pellet machine mold?

1. the use of oil to fill the mold

After the end of the daily processing and production, oil grinding should be used, and the mold hole should be used for a period of time to ensure that all the oil left in the mold hole is oil, which is of great benefit to the work of the next day and is also conducive to the long-term use of the mold.

2. oil cleaning regularly

Xiaobian here to remind you, if more than a month do not use wood pellet machine, it is best to take out the oil inside the mold. Because the oil will gradually harden during long-term storage, it will be difficult to remove it during the next use, which will affect the subsequent use of the sawdust pellet machine.

3. long-term do not need to clean the mold

If the sawdust pellet machine is not used for a long time, it is recommended to remove the mold, clean it and then store it. Mainly clean the particles inside the mold and the sawdust attached to the surface of the mold. On the one hand, this prevents the particles from hardening and difficult to remove due to long-term storage, and on the other hand, reduces the corrosion of the sawdust on the mold.

4. molds shall be stored in a dry and ventilated place.

The die of the wood pellet machine is mostly made of alloy steel. If it is in a humid place for a long time, it may cause damage to the surface of the die due to corrosion and reduce its service life.

5. handling process to be careful

The mold of the wood pellet machine is a high-precision accessory. If you are careless in the handling process and damage the structure of the inner wall of the mold hole, it may cause the wood pellet machine to malfunction and shorten the service life of the pellet machine.

The above is to extend the service life of the wood pellet machine five tips, according to these five methods to maintain the mold, I believe your mold can be used longer. (How to makesawdust pellet machineMold more"longevity")